5.4.1 Using bilge pumps
If there is water in the bilge, the automatic bilge pump system activates and pumps out any extra water buildup from the bilge. Use the manual pump as a backup if there is no electricity.
About this task
Normally, you don’t need to do anything other than monitor the water buildup. The automatic bilge pumps detect water in the bilge and automatically pump out water when required.
You can also control the automatic bilge pump system from the Navigation and lighting control panel on the steering console. A light on the panel is lit when the pump is on.
The boat can sink if too much water gets into the boat.
If you suspect a leak, find out the reason and go ashore as soon as possible. The bilge pump system is not designed to pump out large amounts of water.
If there is a rapid increase in water accumulation, call rescue service.