If there is water in the bilge, the automatic bilge pump system activates and pumps out any extra water buildup from the bilge. A manual pump is available as a backup if there is no electricity.

• If water starts building up, start the pump from the panel manually if the automatic doesn't work. Use the manual pump if the automatic pump is out of order or out of power.

  The boat can sink if too much water gets into the boat.

  If you suspect a leak, find out the reason and go ashore as soon as possible. The bilge pump system is not designed to pump out large amounts of water.

  If there is a rapid increase in water accumulation, call rescue service.

  To open the hatch of the aft technical compartment, use the Technical hatch open/close buttons in the side terrace control panel.