Manualy operate the seacocks to control the water flow into or out of your boat.

1. Locate the seacock that you want to open or close.
   The handle may be a lever or a round knob.
2. Turn the handle.
   • To open the valve turn the handle a quarter turn (90 degrees) in the direction of the water flow. The handle is fully open when the handle aligns with the flow direction.
   • To close the valve turn the handle a quarter turn (90 degrees) in the direction opposite to the water flow.
3. Check that the seacock is working properly.
   • Confirm that the water is flowing freely through the seacock.
   • If it is difficult to turn the handle or if there is resistance, inspect for any debris or corrosion.